RIGS


  • 3 DRILLING
    PRODUCTION RIGS

    MAKE AND MODEL

    WOODFIELD, FIELD MASTER-TWIN POLE 55 FEET
    HOOK LOAD 50,000 LBS – ASSOCIATED PORTABLE ROTARY TABLE

    Rigs equipped with Wireless Radios for Direct Communication to Head Office

    SECIFICATIONS

    - FIELD MASTER
    - CAPACITY 4000’
    - TWIN POLE 55FT.
    - HOOK LOADS 50,000 LBS.
    - ALL ANCILLARY TOOLS.
    - ASSOCIATED PORTABLE ROTARY TABLE


  • PRODUCTION RIG
    (RIG #4)

    MAKE AND MODEL

    CARDWELL-SINGLE POLE 50 FEET
    HOOK LOAD 30,000 LBS, CAPACITY 2500 FEET

     

  • DRILLING RIG
    (RIG #5)

    MAKE AND MODEL

    1975 FAILING Model 2000 Mobile Drilling Rig, Serial #903244,

    SPECIFICATIONS

    Mounted on an International 210-D Truck Powered by a Detroit Diesel 671 Engine, capable of Drilling to 2000 feet with 2-7/8" Drill Pipe and Rehabilitation work to a depth of 3000 feet complete with the following:-
    a) Mud Pump – As per attached
    b) 18” Rotary Table
    c) 4-1/2” Round Fluted Kelly
    d) Hydraulic Leveling Jacks
    e) 185 CFM Compressor
    f) Electric Generator

     

     

  • ROTARY
    DRILLING RIG
    (RIG #6)

    MAKE AND MODEL

    1981 MICHAELS Model 3500 Mounted on a NABOURS Tandem Axle Trailer Model 34D-007726
    Complete with Detroit Diesel Engine and Allison Transmission 750 DRD Heavy Duty Draw-Works

    SPECIFICATIONS

    Two (2) Catheads 12" (Tillary & Parks)
    18" Rotary Table (Howard Turner)
    Four (4) Hydraulic Leveling Jacks
    Six (6) Screw Jacks
    Two (2) BJ Type C Make & Break Tongs
    Two 3-Sheave 35 ton Travelling Blocks
    Heavy Duty Water Swivel (King)
    60ft Derrick Rated 120,000 lbs with Finger Board & Lighting
    600 Gallon Fuel Tank on Gooseneck
    Hydraulic Pull Down
    Heavy Duty Drill Frame
    Control Console
    Kelly 4-5/8" Round Fluted 34-1/2ft long
    Martin Decker Weight Indicator
    12.5 ft elevated Rig Sub Structure
    180 Barrel Mud System
    1 Swaco Shale Shaker
    2 Motorized Agitators
    1 degasser
    1 EMSCO D550 Mud Pump powered by Detroit 12V71
    1 National C-150 Mud Pump powered by Detroit 8V71
    75 joints 3 ½” Drill Pipe
    50 joints 4 ½” Drill Pipe
    4 – 6 ¼ ” Drill Collars
    2 – 5 ½” Drill Collars
    4 – 4 ¾” Drill Collars
    1 – 5” Heavy Weight Drill Pipe

    SERIAL NUMBER

    3500-00100 (Rig)
    27443-DFT (Trailer)
    8VA410978 (Engine)
    6885561 (Transmission)

    CAPACITY / CAPABILITY

    Drilling to 4000 feet

     

  • DRILLING RIG
    (RIG #7)

    MAKE AND MODEL

    1969 INGERSOL RHAND DM45E Mobile Drilling Rig, Serial #2825, 1050/350 HR2

    SPECIFICATIONS

    Air Compressor, Cummins KTA 19 diesel engine on deck mounted on CAT 235 tracks,
    Operator’s cab, Leveling jacks, 70,000# pullback, 5 rod carrousel, 10 gpm water injection pump, Hammer Oiler, Drill pipe 4-1/2 x 25’ x 3-1/2”, Regular connection table bushing to open 12” break-out-wrench

  • ROTARY
    DRILLING RIG
    (RIG #8)

    MAKE AND MODEL

    2006 Atlas Copco Model T4W

    PULLBACK DERRICK

    70,000 lb

    SPECIFICATIONS

    With Ingersoll-Rand HR 2.5 1070/350 Air compressor
    Spur Gear Rotary 8,000ft lb Torque, 25G.P.M CAT Water Injection pump, 7Gallon hammer Oiler, and auxiliary air manifold.
    Mounted on a 2006 crane carrier with cat C13 380 H.P. and Jacobs Brake